湖北赖子麻将怎么打|赖子麻将运行慢
PerkinElmer

Search Results for 'ICP'

Products & Services (705)
Filters:

Filters :

Show results for
Product Type
  • Accessories (63)
  • Consumables (624)
  • Instruments (5)
  • Reagents (1)
  • Service Parts (3)
  • Software and Informatics (9)
Concentration
  • 0.02 % (1)
  • 1 μg/mL (70)
  • 10 μg/g (1)
  • 10 μg/L (2)
  • 10 μg/mL (5)
  • 100 μg/mL (1)
  • 1000 μg/g (20)
  • 1000 μg/g (1)
  • 1000 μg/mL (29)
  • 5000 μg/g (1)
  • Ca @ 5000 μg/g; P, Zn @ 1600 μg/g (2)
Depth
  • 34.0 cm (1)
  • 41.0 cm (1)
  • 54.0 cm (1)
  • 63.5 cm (1)
  • 69.0 cm (2)
  • 84.0 cm (1)
Detection Method
  • Radiometric (1)
Grade
  • Pure Plus (102)
Inner Diameter
  • 0.64 mm (1)
  • 0.76 mm (1)
  • 0.062 in (1)
  • 0.15 mm (1)
  • 0.19 mm (4)
  • 0.20 mm (1)
  • 0.25 mm (4)
  • 0.30 mm (1)
  • 0.38 mm (2)
  • 0.44 mm (3)
  • 0.5 mm (2)
  • 0.51 mm (3)
  • 0.64 mm (2)
  • 0.76 mm (5)
  • 0.8 mm (5)
  • 1 mm (1)
  • 1.0 mm (3)
  • 1.02 mm (2)
  • 1.14 mm (2)
  • 1.2 mm (10)
  • 1.30 mm (4)
  • 1.42 mm (1)
  • 1.5 mm (5)
  • 1.52 mm (1)
  • 1.6 mm (2)
  • 1.65 mm (1)
  • 1.85 mm (2)
  • 2.0 mm (15)
  • 2.06 mm (1)
  • 2.5 mm (5)
  • 3.0 mm (2)
  • 3.18 mm (1)
Length
  • 51-100 (2)
Material
  • Alumina (9)
  • Ceramic (3)
  • CTFE (9)
  • Glass (22)
  • Nickel (1)
  • PEEK (5)
  • PEEK/PTFE (2)
  • PFA (37)
  • Platinum (2)
  • Polypropylene (2)
  • PTFE (13)
  • PVC (26)
  • Quartz (72)
  • Ryton (1)
  • Santoprene (7)
  • Sapphire (6)
  • Silicone (3)
  • SilQ (9)
  • Solvent Flex (7)
  • TFE (1)
  • Vespel (1)
  • Viton (13)
Model Compatible With
  • AAnalyst 600 (2)
  • AAnalyst 700 (3)
  • AAnalyst 800 (2)
  • Avio (37)
  • Avio 200 (94)
  • Avio 500 (93)
  • Clarus GCMS (1)
  • ELAN (1)
  • ELAN 5000 (31)
  • ELAN 6x00 (40)
  • ELAN 9000 (44)
  • ELAN 9000 Controller Side (2)
  • ELAN 9x00 (1)
  • ELAN DRC II (32)
  • ELAN DRC-e (33)
  • ELAN DRCs (10)
  • FAST (5)
  • NexION (3)
  • NexION 1000 (110)
  • NexION 2000 (132)
  • NexION 300 (49)
  • NexION 350 (50)
  • NexION RF Generator Side (1)
  • Optima (4)
  • Optima 2100 (1)
  • Optima 2x00 (3)
  • Optima 2x00 DV (36)
  • Optima 3000 SCX (2)
  • Optima 3000 XL (1)
  • Optima 3x00 DV (13)
  • Optima 3x00 XL (1)
  • Optima 4300 V (15)
  • Optima 4x00 (3)
  • Optima 4x00 DV (62)
  • Optima 5300 V (14)
  • Optima 5x00 (3)
  • Optima 5x00 DV (64)
  • Optima 7000 (1)
  • Optima 7000 DV (1)
  • Optima 7300 V (15)
  • Optima 7x00 (3)
  • Optima 7x00 DV (64)
  • Optima 8000 (2)
  • Optima 8x00 (81)
  • Plasma 40 (1)
  • Sample Preparation Blocks (1)
  • SQ 8 (1)
Number of Elements
  • Multiple (15)
  • Single (124)
Pipetting Arms
Product Brand Name
  • Avio (2)
  • Capricorn (1)
  • D-Torch (9)
  • DuraMist (2)
  • Elegra (1)
  • ESI (5)
  • FIAS (1)
  • GemTip (5)
  • IsoMist (16)
  • MEINHARD (16)
  • MicroFlow (13)
  • MicroFlow-ST (3)
  • MicroMist (5)
  • Mira Mist (2)
  • NEN Radiochemicals (1)
  • NexION (2)
  • OilPrep (1)
  • OpalMist (5)
  • Peltier (14)
  • pergo (5)
  • PerkinElmer (7)
  • S10 (1)
  • SeaSpray (5)
  • Slurry (1)
  • Teledyne CETAC (1)
  • Titan (1)
  • Tracey (4)
  • Twister (1)
  • Valco (1)
Product Group
  • Accessories (1)
  • Adapters (9)
  • Adapters and Replacement Parts (10)
  • Autosamplers (1)
  • Blowers and Vents (2)
  • Bonnets (1)
  • Bottles and Containers (2)
  • Capillary Assemblies and Tubing (19)
  • Capillary Tubing (1)
  • Cleaning Tools (1)
  • Compressor Replacement Parts (1)
  • Cooling Systems (1)
  • Desolvation Accessory (3)
  • Detector Kit (1)
  • Drain Lines (2)
  • Ferrules (1)
  • Filter Replacement Part (3)
  • Filters (1)
  • Flow Injection Tubing (7)
  • Gas Lines (2)
  • Gas Lines and Tees (4)
  • ICP-OES Compressors (7)
  • Injectors (40)
  • Inorganic (119)
  • Instrument Filters (1)
  • Ion Lens Tools (2)
  • Ion Lenses (3)
  • Metallo-Organic (33)
  • Mixing Tees (1)
  • Nebulizer Tips (2)
  • Nebulizers (36)
  • O-Rings (22)
  • Online Mixing Kits (2)
  • Outer Tubes (1)
  • Peristaltic Pump Tubing (30)
  • Power Conditioner (5)
  • Probes (8)
  • Probes and Sample Tools (1)
  • Pump (1)
  • Purge Windows (5)
  • Regulators (3)
  • Replacement Parts (7)
  • Rotors and Stators (6)
  • Safety Shield (3)
  • Safety Shields (2)
  • Sample Introduction Kits (38)
  • ShadowStops (2)
  • Skimmer Cones (3)
  • Software and Informatics (3)
  • Spares Kits (1)
  • Spray Chamber Mounts (1)
  • Spray Chambers (17)
  • Temperature Controlled Spray Chambers (29)
  • Torch Ignitor Tape (1)
  • Torch Modules (5)
  • Torch Mounts (16)
  • Torch Replacement Parts (8)
  • Torch Tools (2)
  • Torches (25)
  • Tubing and Replacement Parts (3)
  • UPS System (1)
  • Vacuum Pumps (1)
  • Valve Replacement Parts, Pumps (1)
  • Valves (4)
Radioisotope
  • Y-90 (1)
Radionuclide
  • 90Y (1)
Style
  • 0-Slot (12)
  • 1-Slot (4)
  • 2-Slot (1)
  • 3-Slot (4)
  • Flared (23)
  • Standard (25)
Technology
  • ICP Mass Spectrometry (1)
  • ICP Optical Emission Spectroscopy (1)
  • Mercury Analysis Systems (1)
Technology Type
  • AA (2)
  • Atomic Absorption (1)
  • Atomic Spectroscopy (2)
  • Gas Chromatography (GC) (1)
  • ICP (1)
  • ICP Mass Spectrometry (5)
  • ICP Optical Emission Spectroscopy (2)
  • ICP-MS (175)
  • ICP-OES (172)
Technology
  • ICP Mass Spectrometry (1)
  • ICP Optical Emission Spectroscopy (1)
  • Mercury Analysis Systems (1)
Type
  • Baffled and Cyclonic (11)
  • Barrel (2)
  • Cyclonic (3)
  • Peristaltic Pump Tubing (1)
  • Scott (2)
  • Standard Three-Stop (4)
  • Standard Two-Stop (41)
Volume
  • 201-250 (1)
Volume Capacity
  • 1 Gal (1)
  • 100 g (1)
  • 125 mL (113)
  • 20 mL (1)
  • 400 g (2)
  • 5 Gal (3)
  • 50 g (23)
  • 50 mL (1)
  • 500 mL (6)
Standard Type
  • AA Standards (1)
  • Aqueous (71)
  • Biodiesel Blends for IR (1)
  • Contract Required Detection Limits (1)
  • Environmental (1)
  • Instrument Calibration (7)
  • Internal Standards (1)
  • Matrix Oils and Solvents (2)
  • Metal Additive (1)
  • Metal Additive Standards (2)
  • Multi-Element (4)
  • Nitric Acid Blanks (1)
  • Particle Analysis (2)
  • Single-Element (53)
  • Spike (1)
  • USP/ICH Standards (1)
  • Water Pollutant (2)

1-12 of 705 Products & Services

Sort by

  • Jump to:
Business Insights (31)
Filters:

Filters :

Resource Library
  • Application Note (22)
  • Brochure (2)
  • Case Study (2)
  • Flyer (3)
  • White Paper (2)

1-12 of 31 Business Insights

Sort by

  • Case Study

    Colorado School of Mines Uses a NexION 300Q ICP-MS to Obtain a Better Understanding of the Environmental Impact of Engineered Nanomaterials

    One of the leading academic research groups involved with the study of the impact of ENPs on the environment is the Colorado School of Mines (CSM), based in Golden, Colorado.

  • Application Note

    Using MSF to Resolve Difficult Interferences in Metallurgical Samples with the Avio 500 ICP-OES

    The analysis of trace metals in metallurgical matrices also presents a challenge for ICP-OES: spectral interferences. Many elements have a large number of emission lines (i.e. approximately 20,000 for iron), which increases the potential for spectral interferences. This effect is compounded in metallurgical samples, where the matrix element(s) are present at high levels due to the minimal dilutions used.

  • Application Note

    The Determination of Lead in Calcium-Based Antacid and Dietary Supplements Using the NexION 350 ICP-MS System to Comply with the State of California's Proposition 65 Legislation

    Compliance with California’s Proposition 65 for the monitoring of lead (Pb) in calcium-based antacid medications and dietary supplements requires the analytical methodology to demonstrate detection limits below 0.05 μg/g in the solid material. The analytical capabilities of Inductively Coupled Plasma Mass Spectrometry (ICP-MS) make it the most suitable technique for performing lead determinations at these low levels on a routine basis.

  • Application Note

    Analysis of In-Service Oils Following ASTM D5185 with the Avio 500 ICP-OES

    Globally, heavy machinery is used in construction, mining, and a variety of other areas. As the scale of the operations increase, the size, complexity, and cost of the equipment also increase, meaning that breakdowns can be costly, both in equipment repair and lost revenue. As a result, preventive maintenance is paramount. Lubricants are among the key fluids that can be tested, especially the oil used in engines. By monitoring the elemental concentration of the oil or other lubricants (hydraulics, transmission, gear), the status of that compartment can be determined.

  • Flyer

    5 Tips to Improving Your Sample Digestion

    Sample preparation is one of the most critical steps in your analytical process. Often accounting for 60% of your analytical timetable, it has a fundamental impact on laboratory throughput and analytical performance. Any errors within the sample preparation process will undermine the quality of your food data at all subsequent stages of your analysis. Here are five tips to improving your sample digestion for food samples.

  • Application Note

    Analysis of Impurities in Nickel with Avio 500 ICP-OES Following London Metal Exchange Guidelines

    The London Metal Exchange (LME) issues specifications for a variety of purities for different metals. This work focuses on the analysis of contaminants in nickel with PerkinElmer’s Avio? 500 ICP Optical Emission Spectrometer (ICP-OES), using “Special Contract Rules for Primary Nickel” as a guideline for the analytes and required concentrations.

  • Application Note

    Analysis of In-Service Oils Following ASTM D5185 with the Avio 200 ICP-OES

    With heavy machinery, it is important to assess its status during operation to prevent breakdowns and costly repairs. A key aspect is monitoring the status of the oil or lubricants used to lubricate various components such as engines, transmissions, gearboxes and many other important areas: if the oil degrades too much or becomes highly contaminated, it can damage various components. Because of its importance, ASTM created a method for the analysis of in-service oils: method D5185.

  • Application Note

    Analysis of Single-Walled Carbon Nanotubes with SP-ICP-MS

    Measuring the amount of metals in CNTs presents a challenge. High levels can be measured directly in the solid by several techniques, including XRF and TEM, while low-level analysis requires complete digestion of the sample prior to analysis by ICP-OES or ICP-MS.

  • Flyer

    OilPrep 4 Oil Diluter Flyer

    Need flexible sample preparation for wear metals and particle count analyses? The OilPrep? 4 is a dedicated four-tip oil diluter that automatically dilutes oil samples with kerosene (V-Solv? ICP solvent), in preparation for wear metals and particle counting/sizing analyses by inductively coupled plasma (ICP-OES) and single particle optical sizing (SPOS), such as with the Avio? ICP-OES and LPC 500? Liquid Particle Counter.

    Some key benefits include:

    • High throughput – Significantly improves productivity and efficiency versus manual or single-tip systems. Diluting up to 250 samples per hour, one OilPrep 4 oil diluter can prepare approximately 2000 samples in 8 hours.
    • Flexibility – Innovative Varispan? technology provides automatic computer-controlled variable sample probe spacing for multi-tipped processing of original sample containers.
    • Time Savings – Unlike alternate technologies, PerkinElmer’s Ultrasonic Liquid Level Sensing is not impacted by individual sample viscosities, color, or external lighting.

  • Application Note

    Meeting the Challenges of Soil Analysis with the Avio 200 ICP-OES

    The analysis of soils for elemental contents presents challenges during the sample preparation step. A common method for preparing a soil sample for inorganic elemental analysis involves digesting the soil sample in an acid that is heated to near-boiling to extract the elements for analysis. When using open vessels in heating blocks, this extraction method typically takes four hours or more to complete. The sample must then be centrifuged or filtered to remove solid particles prior to analysis. The use of a microwave digestion system can speed this up significantly by completing the acid digestion in less than 50 minutes.

  • Application Note

    Testing and Validation of Various Antacids for Elemental Impurities using the NexION 2000 ICP-MS

    The United States Pharmacopeia (USP) has announced that its new standards for elemental impurities in drug products has been implemented since January 1, 2018. General Chapters <232> and <2232> specify the list of elements and their permissible daily exposure (PDE) limits based on the route of administration.

  • Application Note

    Analysis of Soils and Waters in Accordance with U.S. EPA Method 6020B using the NexION 2000 ICP-MS

    Through the years, both industry and analytical instrumentation have advanced. With the development of new chemicals and processes, new pollutants may enter the environment. However, the capabilities of analytical instruments have also increased, allowing the measurement of ever lower levels of environmental contaminants, as well as new pollutants.

  • Jump to:
湖北赖子麻将怎么打 天津时时网站平台 全天实时计划一分快三 天津福利彩票快乐十分电子版 青海快三预测 免费彩票选号器 新时时彩合买 体福建时时 必中肖四不像 天津快乐十分钟开奖结果查询 看新闻app哪个软件好